HobbyKing
TURNIGY NANO-TECH 2200MAH 3S 25~50C LIPO PACK
| Discharge Plug | XT60 |
: 2200mAh, : 3S1P / 3 Cell / 11.1V, : 25C Constant / 50C Burst, : 187g (including wire, plug & case), : 106x35x24mm, : JST-XH, Suited to the following models:, ALIGN T-REX450, E-flite Blade 450 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE.,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 2200MAH 3S 45~90C LIPO PACK
| Discharge Plug | XT60 |
: 2200mAh, : 3S1P / 3 Cell / 11.1V, : 45C Constant / 90C Burst, : 201g (including wire, plug & case), : 112x36x26mm, : JST-XH, Suited to the following models:, ALIGN T-REX450, E-flite Blade 450 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE, Caliber 450V, CALIBER 400, RAVE 450, GAUI 330S,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
HK EDF70 BRUSHLESS POWER SYSTEM 2800KV & 45A ESC
| Size | 70mm |
| Weight | 139g |
| Dimensions | 90x83mm |
| No.Of cells | 4S(14.8V) |
| Shaft diameter | 4.0mm |
| RPM/V | 2800 |
| Output Power | 550w |
| Max Current(<60s) | 36A |
| Thrust | 1200g(42.33oz.) |
| Recommended model weight | 800-1200g |
Motor:, 2839 Brushless outrunner, Blade type:6,
A high quality and powerful 70mm upgrade system. Spec.5 Reviews
HobbyKing
HK2836 EDF OUTRUNNER 3800KV FOR 64MM
| Specs | Kv- |
| Dimensions | 75 x 28mm |
| Shaft diameter | 3.0mm |
| Shaft length | 10mm |
| Voltage | 14.8V |
| Weight | 97g |
| Output Power | 520w |
| Max current(<60s) | 35A |
| RPM/V | 3800 |
| Thrust | 1100g(38.8oz.) |
| Recommended model weight | 600-800g |
| Recommended model fans | 64mm Fans |
| Mounting Hole Bolt Circle | 18mm |
| Mtg. Hole Number & Size | 4 x M2 |
5 Reviews
HobbyKing
TURNIGY NANO-TECH 1800MAH 4S 35~70C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 1800mAhVoltage: 4S1P / 4 Cell / 14.8VDischarge: 35C Constant / 70C BurstWeight: 207g (including wire, plug & case)Dimensions: 103x35x29mmBalance Plug: JST-XHDischarge Plug: XT60 ConnectorSuited to the following models: RAVE450 * The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.-Higher capacity during heavy discharge. ,
5 Reviews
HobbyKing
HOBBYKING 929MG METAL GEAR SERVO 2.2KG/ 12.5G/ 0.10SEC
| Model | HK-CS929MG |
| Operating Voltage | 4.8V / 6.0V |
| Operating Current | 200mA / 240mA |
| Stall Torque | 2.0kg.cm /2.2kg.cm |
| Weight | 12.5g |
| Dead Band | ≤3uSec |
| Ball bearing | MR85 |
| Gear | Metal |
| Connector wire | 215mm |
| Operating Temperature Range | -20J+60J |
Operating Speed:, 0.12sec.60º/ 0.10sec.60º, Size:, 22.5X11.5X24.6mm(0.88"x0.45"x0.96"), Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 2 slider/Direct Drive,
HobbyKing 929MG Metal Gear Servo 2.2kg/ 12.5g/ 0.10sec5 Reviews
HobbyKing
MICRO LIGHT AIRCRAFT 2.4GHZ AIRPLANE W/ 2.4GHZ READY-2-FLY
| Wingspan | 500mm |
| Length | 396mm |
| Height | 131mm |
| Flying weight | 65g |
| Motor | N50 |
Specifications:, Battery:, 2S 7.4V 180 mAh Li-Po, *Note:, This model now includes a USA style two prong wall plug for charger (see photo).,
Micro EPP light aircraft 2.4Ghz Airplane w/ 2.4Ghz Tx Plug-n-Fly ...5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-36A 910KV / 350W
| Model | NTM Prop Drive 35-36A 910 |
| Turns | 10T |
| Max current | 38A |
| Rated Power | 350w |
| Shaft | 4mm |
| Weight | 117g |
| Bolt holes | 18.9mm & 25mm |
| ESC | 30A |
| Cell count | 3S Lipoly |
| Suggested Prop | 10x4 |
| Efficiency | 83% |
Kv: 910rpm/v, Bolt thread: M3,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
SCM 3213 1250KV BRUSHLESS OUTRUNNER
| Battery | 2-3 Lipoly |
| Max Eff | 82% |
| Max Current | 7 to 10A (over 75% efficiency) |
| Int. Resistance | 125mohm |
| 10v no Load current | .7A |
| Dimensions | 25.7 x 26mm |
| Shaft | 3mm |
| Weight | 45g |
| Model Size | up to 300-600g |
| Recommended Prop | 9x5 3S / 10x5 2S |
Kv: 1250rpm/v,
Spec.5 Reviews
HobbyKing
TURNIGY CA80-80 BRUSHLESS OUTRUNNER (50~80CC EQ)
| Model | 80-80-10 |
| Resistance | 0.011ohm |
| ESC Required | 200A |
| Input Voltage | 30~50V |
| Weight | 1545g |
| Shaft | 8mm |
| Non Load Current | 6.0A at 20V |
| Equivalent | 50-80cc Gas Engine |
Kv :160 rpm/V, Dimensions:, 152x133x81mm (Including Mount),
Designed as a 50 to 80cc gas engine replacement, this ...5 Reviews
HobbyKing
DIGITAL HIGH TORQUE BEARING SERVO 12G/2.6KG/.16SEC
| Model | HD-1581HB |
| Voltage | 4.5v~6v |
| Speed | .16sec |
| Torque | 2.6kg/cm |
| Bearings | 1BB |
| Gears | Nylon |
| Weight | 12g |
| Size | 22.8x12x25.4mm |
5 Reviews
HobbyKing
GWS FAIL-SAFE
| Model | FS-1 |
5 Reviews
HobbyKing
HITEC HS-485HB DELUXE SERVO 4.8KG/45G/0.22SEC
| Applications | Helis and Aircraft up to 72 or up to 12lbs when using just one servo per control surface. |
| Motor Type | 3 Pole |
| Bearing Type | Top BB |
| Speed @ 4.8v | 0.22 sec @ 60 deg. |
| Speed @ 6v | 0.18 sec @ 60 deg. |
| Torque @ 4.8v | 4.8 kg.cm |
| Torque @ 6v | 6 kg.cm |
| Size | 39.8 x 19.8 x 38mm |
| Weight | 45g |
Features:, Note:, Be aware that high vibration gas (not glow) engines combined with large contol surfaces and large thows (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs., Warning:, Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail., Specifications:,
Hitec HS-485HB Deluxe servo 4.8kg/45g/0.22sec HS-485HB updates the very popular ...5 Reviews
HobbyKing
GWS 8CH DUAL CONV 40MHZ FM RECEIVER
| Model | GWRXS001 |
| Channels | 8ch |
| System | FM (PPM) Dual Conversion |
| Voltage | 4.8~7.2v |
| Current Drain | 10mA |
| Weight | 22g/.78Oz |
| Size | 65x25x15.5mm |
| Range | 600mtr+ / 2000ft |
| Adjacent channel rejection | better than 65dB at ?10k Hz |
| Image rejection | better than 65dB |
| Spurious rejection | better than 80dB |
| nter modulation | better than 65dB |
Sensitivity : 1,
GWS 8ch Dual Conv 40mhz FM Receiver Whole new designed, ...5 Reviews
HobbyKing
POWER HD 3688HB DIGITAL SERVO 25G/2.8KG/.07SEC
| Model | HD-3688HB |
| Voltage | 4.5v~6v |
| Speed @ 4.8V | .08sec |
| Speed @ 6V | .07sec |
| Torque @ 4.8V | 2.3kg/cm |
| Torque @ 6V | 2.8kg/cm |
| Weight | 26g |
| Size | 35.5x28.6x15mm |
5 Reviews